Search results for "Thermal resistance"
showing 10 items of 23 documents
Microfabricated high temperature sensing platform dedicated to scanning thermal microscopy (SThM)
2018
Abstract The monitoring of heat flux is becoming more and more critical for many materials and structures approaching nanometric dimensions. Scanning Thermal Microscopy (SThM) is one of the tools available for thermal measurement at the nanoscale and requires calibration. Here we report on a micro-hotplate device made of a platinum heater suspended on thin silicon nitride (SiN) membranes integrating specific features for SThM calibration. These heated reference samples can include a localized resistive temperature sensors (RTD) or standalone platinum membranes (typically 10 × 10 μm2) on which the temperature can be measured precisely. This functional area is dedicated to (1) estimate the th…
Conifer Needles as Thermoplastic Composite Fillers: Structure and Properties
2016
This study describes the properties of thermoplastic polymer composites based on polyethylene (of low and high density) and ethylene-propylene copolymers using various types of conifer needles (pine, spruce, fir, and cedar) as fillers. For the needles, thermogravimetric analysis (TGA) and TGA/Fourier transform infrared spectroscopy (TGA/FTIR) were performed to investigate their structures and thermal resistance, as required for the composite processing methods. Moreover, structural differences were studied for the analyzed fillers and composite materials (FTIR). The results were compared with the values obtained for composites with conifer wood flour. Composites with conifer needles (pine) …
Modeling the heat inactivation of foodborne pathogens in milk powder : High relevance of the substrate water activity
2017
International audience; Due to the ability of foodborne pathogens to survive in low moisture foods, the decontamination of these products is an important issue in food hygiene. Up to now, such decontamination has mostly been achieved through empirical methods. The intention of this work is to establish a more rational use of heat treatment cycles. The effects of thermal treatment cycles on the inactivation of dried Salmonella Typhimurium, Salmonella Senftenberg, Cronobacter sakazakii and Escherichia coli were assessed. Bacteria were mixed with whole milk powder and dried down to different water activity levels (0.11, 0.25, 0.44 and 0.58). The rate of inactivated bacteria was determined afte…
Surviving the heat: heterogeneity of response inSaccharomyces cerevisiaeprovides insight into thermal damage to the membrane
2015
Environmental heat stress impacts on the physiology and viability of microbial cells with concomitant implications for microbial activity and diversity. Previously, it has been demonstrated that gradual heating of Saccharomyces cerevisiae induces a degree of thermal resistance, whereas a heat shock results in a high level of cell death. Here, we show that the impact of exogenous nutrients on acquisition of thermal resistance differs between strains. Using single-cell methods, we demonstrate the extent of heterogeneity of the heat-stress response within populations of yeast cells and the presence of subpopulations that are reversibly damaged by heat stress. Such cells represent potential for…
Thermal response test analysis for U-pipe vertical borehole heat exchangers under groundwater flow conditions
2021
[EN] Conventional models used in the analysis of thermal response test data only consider conduction as heat transfer mechanism. In cases where presence of groundwater is detected, convection heat transmission plays an important role, so its influence must be determined in the calculation of the effective thermal conductivity, usually overestimated in these situations, increasing its value the higher the power injected and the time elapsed. In this work, based on the data collected in a borehole located at UPV (Valencia) in which have been carried out three thermal response tests with different characteristics, has been implemented a variation of the finite line source model introducing an …
Energy-saving potential of ground source multiple chillers in simple and hybrid configurations for Mediterranean climates
2022
Air conditioning accounts for a large share of energy usage in residential and tertiary sectors. Renewable energy technologies offer promising solutions to reduce the environmental impacts of meeting buildings’ energy loads. The possibility of using the soil as a thermal reservoir for heating and cooling systems has gained growing attention in the last decade due to its high potential for energy saving. In this paper, the benefits achievable using ground source chillers for air conditioning in an office building located in Southern Italy are discussed. A multiple chillers system coupled with a borehole heat exchanger is investigated and compared to conventional air-cooled and water-cooled s…
Thermal resistance and upper lethal temperatures of underyearling Lake Inari Arctic charr
1997
Underyearling Arctic charr were acclimated to six temperatures between 6 and 21·5°C and thermal tolerance and resistance were tested after an acclimation period of at least 2 weeks. Resistance times were influenced by acclimation temperature and the highest upper incipient lethal temperature was 23–24°C. An upper limit for cultivation of Lake Inari charr is suggested to be 21°C which is the intercept of the function which represents the upper limit of the thermal tolerance zone.
Thermal Stability of a DC/DC Converter with Inductor in Partial Saturation
2021
Inductors operated in quasi saturation in dc–dc converters allow reduction of the core size and realization costs; on the other hand, they imply an increase of dissipated power that can jeopardize the thermal stability of the converter. In this article, this issue is studied by a mathematical model able to represent both the inductor nonlinearity and its temperature dependence. The main losses, such as ohmic, skin effect and magnetic, are taken into account in the model. The inductor is characterized by a polynomial curve whose parameters are a function of the temperature. Finally, the whole converter is modeled and simulation results, obtained on a boost converter, are compared with experi…
On natural convection in a single and two zone rectangular enclosure
1992
Abstract Convective heat transfer was investigated numerically for rectangular enclosures both undivided and divided in two zones by a vertical partition, and having opposite isothermal walls at different temperatures. The aspect ratio was varied from 0.1 to 16 and the Rayleigh number from 3.5 ∗ 10 3 to ∗ 10 7 (non-partitioned enclosures) and from 1.0 ∗ 10 5 to 1.6 ∗ 10 8 (partitioned enclosures). The thickness and conductivity of the partition were varied. The end wall thermal boundary conditions were adiabatic or LTP (Linear Temperature Profile). The continuity, momentum and energy equations for a 2-D laminar steady flow were solved under the Boussinesq approximation by using a finite-dif…
Combined action of redox potential and pH on heat resistance and growth recovery of sublethally heat-damaged Escherichia coli
2000
International audience; The combined effect of redox potential (RP) (from -200 to 500 mV) and pH (from 5.0 to 7.0) on the heat resistance and growth recovery after heat treatment of Escherichia coli was tested. The effect of RP on heat resistance was very different depending on the pH. At pH 6.0, there was no significant difference, whereas at pH 5.0 and 7.0 maximum resistance was found in oxidizing conditions while it fell in reducing ones. In sub-lethally heat-damaged cells, low reducing and acid conditions allowed growth ability to be rapidly regained, but a decrease in the redox potential and pH brought about a longer lag phase and a slower exponential growth rate, and even led to growt…